Armourseal - Sign Manufacturing - Sign Fixings |
 |
Sign is supplied with Bighead fasteners pre-set in position.
The cairn / stone wall is simply drilled, filled with bonding material and the sign mounted in position. |
 |
Sign can be supplied pre-drilled ready for screws.
Simply drill and plug the wall in the conventional manner.
The sign can then be quickly screwed to the wall |
 |
Sign is supplied with Bighead fasteners pre-set in position.
The fasteners go through the lectern stand and are fixed by special pre-stressed nuts which shear off to leave irremovable collars. |
|
 |
Sign is supplied with Signfix strips which allow for lateral adjustment.
Steel bands go around the pole and through the Signfix bracket which allows for vertical adjustment.
Final tightening is by nut & bolt assembly. |
 |
Frame is attached to the sign by screw from the back.
Sign is supplied with Bighead fasteners pre-set in position.
Fix by the Wall Mounting method. |
 |
Sign is supplied with Bighead fasteners pre-set in position.
The wall is simply drilled, filled with bonding material and the sign mounted in position. |
 |
Baton is screwed to the wall.
Separate baton is screwed to the sign from the back.
Sign is now offered to the wall and the 2 batons are screwed together. |
 |
Sign is supplied with Bighead fasteners pre-set in position.
The fasteners go through the post and are fixed by special pre-stressed nuts which shear off to leave irremovable collars. |